| 
|  | | | | | | | | | | | Tread | Pitch | D | C | E | a | øb | f | M | Locking torque | Loosening torque | | max. Nm | Nm |
| M20 | 1 | 38 | 33 | 16 | 4 | 6-M4 | 5 | 3-M5x0.8 | 4.5 | 28.9 | | M20 | 1.5 | 3-M6x1.0 | 8 | 28.9 | | M25 | 1.5 | 18 | 4.5 | 4 | 30.4 | | M30 | 1.5 | 45 | 40 | 9-M5 | 5 | 32.4 | | M35 | 1.5 | 52 | 47 | 3-M8x1.25 | 18 | 39.2 | | M40 | 1.5 | 58 | 52 | 20 | 5 | 9-M6 | 46.1 | | M45 | 1.5 | 65 | 59 | 6 | 61.8 | | M50 | 1.5 | 70 | 64 | 12-M6 | 6-M8x1.25 | 70.6 | | M55 | 2 | 75 | 68 | 22 | 5.5 | 88.2 | | M60 | 2 | 80 | 73 | 98 | | M65 | 2 | 85 | 78 | 127.5 | | M70 | 2 | 92 | 84 | 24 | 6 | 12-M8 | 7 | 147.1 | | M75 | 2 | 98 | 90 | 152 | | M80 | 2 | 105 | 96 | 8 | 156.9 | | M85 | 2 | 110 | 102 | 176.5 | | M90 | 2 | 120 | 108 | 26 | 6.5 | 9 | 186.3 | | M95 | 2 | 125 | 113 | 201 | | M100 | 2 | 130 | 118 | 220.6 | | M105 | 2 | 140 | 125 | 28 | 7 | 11 | 6-M10x1.5 | 35 | 236.3 | | M110 | 2 | 145 | 132 | 252 | | M115 | 2 | 150 | 137 | 268.1 | | M120 | 2 | 155 | 142 | 30 | 7.5 | 279.4 | | M125 | 2 | 160 | 147 | 289.2 | | M130 | 2 | 165 | 152 | 313.7 | | M135 | 2 | 175 | 160 | 32 | 8 | 14 | 352.9 | | M140 | 2 | 180 | 165 | 392.2 | | M145 | 2 | 190 | 175 | 16 | 436.3 | | M150 | 2 | 195 | 180 | 480.4 |
|
※The difference with this design is that the balance sdjustment screws tighten from the outer skirt at a radial angle.It is the optimal choice for spindles with restricted
space.Balance adjustment screw holes can be fitted with screw-in plugs(optoin),eliminating high frequency noise and subsequent vibration.
※The data is not as good as it is available. Please contact CHENA for the remaining dimensions.
