 |  |  | | | | | | | D | L | d | Solid height | Max. Compression | Load
N/max | Modulus
±10% | | L x % | F max. |
|
| 3 | 5 | 0.35 | 2.8 | 40% | 2 | 2.9 | 1.5
N/mm | | 10 | 0.40 | 4.8 | 40% | 4 | 5.9 | | 15 | 0.45 | 8.3 | 40% | 6 | 8.8 | | 20 | 0.45 | 8.3 | 30% | 6 | 8.8 | | 25 | 0.50 | 14 | 32% | 8 | 11.8 | | 30 | 0.50 | 14 | 27% | 8 | 11.8 | | 4 | 5 | 0.40 | 2.6 | 40% | 2 | 2.9 | 1.5
N/mm | | 10 | 0.45 | 3.9 | 40% | 4 | 5.9 | | 15 | 0.50 | 6.0 | 40% | 6 | 8.8 | | 20 | 0.55 | 9.4 | 40% | 8 | 11.8 | | 25 | 0.60 | 14.4 | 40% | 10 | 14.7 | | 30 | 0.60 | 14.4 | 33% | 10 | 14.7 | | 5 | 5 | 0.45 | 2.6 | 40% | 2 | 2.9 | 1.5
N/mm | | 10 | 0.50 | 3.6 | 40% | 4 | 5.9 | | 15 | 0.60 | 7.5 | 40% | 6 | 8.8 | | 20 | 0.60 | 7.5 | 40% | 8 | 11.8 | | 25 | 0.65 | 10.7 | 40% | 10 | 14.7 | | 30 | 0.70 | 15.4 | 40% | 12 | 17.7 | | 35 | 0.70 | 15.4 | 40% | 14 | 20.6 | | 6 | 5 | 0.50 | 2.4 | 40% | 2 | 3.9 | 2.0
N/mm | | 10 | 0.60 | 4.2 | 40% | 4 | 7.8 | | 15 | 0.70 | 7.4 | 40% | 6 | 11.8 | | 20 | 0.70 | 7.4 | 40% | 8 | 15.7 | | 25 | 0.80 | 13.6 | 40% | 10 | 19.6 | | 30 | 0.80 | 13.6 | 40% | 12 | 23.5 | | 35 | 0.85 | 17.5 | 40% | 14 | 27.5 | | 40 | 0.90 | 23.4 | 40% | 16 | 31.4 | | 45 | 0.90 | 23.4 | 40% | 18 | 35.3 | | 50 | 0.90 | 23.4 | 36% | 18 | 35.3 | | 60 | 1.00 | 41.0 | 30% | 18 | 35.3 | | 70 | 1.00 | 41.0 | 34% | 24 | 47.1 | | 8 | 10 | 0.75 | 5.3 | 40% | 4 | 7.8 | 2.0
N/mm | | 15 | 0.75 | 5.3 | 40% | 6 | 11.8 | | 20 | 0.90 | 10.4 | 40% | 8 | 15.7 | | 25 | 0.90 | 10.4 | 40% | 10 | 19.6 | | 30 | 1.00 | 17.0 | 40% | 12 | 23.5 | | 35 | 1.00 | 17.0 | 40% | 14 | 27.5 | | 40 | 1.00 | 17.0 | 40% | 16 | 31.4 | | 45 | 1.10 | 25.3 | 40% | 18 | 35.3 | | 50 | 1.10 | 25.3 | 40% | 20 | 39.2 | | 60 | 1.10 | 25.3 | 40% | 24 | 47.1 | | 70 | 1.20 | 39.6 | 40% | 28 | 54.9 | | 10 | 10 | 0.85 | 5.1 | 40% | 4 | 7.8 | 2.0
N/mm | | 15 | 0.85 | 5.1 | 40% | 6 | 11.8 | | 20 | 1.00 | 9.5 | 40% | 8 | 15.7 | | 25 | 1.00 | 9.5 | 40% | 10 | 19.6 | | 30 | 1.10 | 14.3 | 40% | 12 | 23.5 | | 35 | 1.10 | 14.3 | 40% | 14 | 27.5 | | 40 | 1.20 | 20.4 | 40% | 16 | 31.4 | | 45 | 1.20 | 20.4 | 40% | 18 | 35.3 | | 50 | 1.20 | 20.4 | 40% | 20 | 39.2 | | 60 | 1.30 | 29.9 | 40% | 24 | 47.1 | | 70 | 1.40 | 43.4 | 34% | 24 | 47.1 | | 13 | 15 | 1.00 | 5.75 | 40% | 6 | 11.8 | 2.0
N/mm | | 20 | 1.20 | 10.5 | 40% | 8 | 15.7 | | 25 | 1.20 | 10.5 | 40% | 10 | 19.6 | | 30 | 1.30 | 15.0 | 40% | 12 | 23.5 | | 35 | 1.30 | 15.0 | 40% | 14 | 27.5 | | 40 | 1.40 | 20.3 | 40% | 16 | 31.4 | | 45 | 1.40 | 20.3 | 40% | 18 | 35.3 | | 50 | 1.50 | 27.8 | 40% | 20 | 39.2 | | 60 | 1.50 | 27.8 | 40% | 24 | 47.1 | | 70 | 1.60 | 38.4 | 40% | 28 | 54.9 | | 80 | 1.60 | 38.4 | 40% | 32 | 62.8 | | 16 | 15 | 1.20 | 7.2 | 40% | 6 | 11.8 | 2.0
N/mm | | 20 | 1.30 | 9.1 | 40% | 8 | 15.7 | | 25 | 1.30 | 9.1 | 40% | 10 | 19.6 | | 30 | 1.40 | 12.3 | 40% | 12 | 23.5 | | 35 | 1.50 | 16.5 | 40% | 14 | 27.5 | | 40 | 1.60 | 21.6 | 40% | 16 | 31.4 | | 45 | 1.60 | 21.6 | 40% | 18 | 35.3 | | 50 | 1.70 | 28.0 | 40% | 20 | 39.2 | | 60 | 1.70 | 28.0 | 40% | 24 | 47.1 | | 70 | 1.80 | 36.0 | 40% | 28 | 54.9 | | 80 | 1.80 | 36.0 | 40% | 32 | 62.8 | | 20 | 20 | 1.70 | 10.6 | 40% | 8 | 31.4 | 3.9
N/mm | | 25 | 1.80 | 12.6 | 40% | 10 | 39.2 | | 30 | 1.80 | 12.6 | 40% | 12 | 47.1 | | 35 | 2.00 | 19.0 | 40% | 14 | 54.9 | | 40 | 2.00 | 19.0 | 40% | 16 | 62.8 | | 45 | 2.00 | 19.0 | 40% | 18 | 70.6 | | 50 | 2.20 | 27.5 | 40% | 20 | 78.5 | | 60 | 2.20 | 27.5 | 40% | 24 | 94.1 | | 70 | 2.30 | 34.5 | 40% | 28 | 109.8 | | 80 | 2.40 | 40.88 | 40% | 32 | 125.5 |
|
※Load calculation formula：Load(N) = Modulus x Compression
※Conversion：kgf=N x 0.102
※Solid height is the reference value,there will be little difference in the production.
| Example：CC156-5-30-0.7
Length 30(ex. Tensile 5mm) to load 25
Load=Modulus X Extension
7.5N=1.5N/mm X 5mm |
