| |
| |
|
|
|
|
|
|
|
|
|
|
| unit:mm | |
Ultimate load | M | Pitch | L | SW | S | A | H | F | D | B | G | C | Locking torque | Weight | ||
Short thread | Long thread | Short thread | Long thread | |||||||||||||
0.3 | M8 | 1.25 | 11 | 76 | 13 | 6 | 30 | 29 | 85 | 10 | 35 | 55 | 35 | 30 | 0.2 | 0.3 |
0.63 | M10 | 1.5 | 16 | 96 | 17 | 36 | 60 | 0.3 | 0.4 | |||||||
1 | M12 | 1.75 | 18 | 114 | 19 | 8 | 33 | 36 | 98 | 14 | 37 | 57 | 44 | 100 | 0.5 | 0.6 |
1.5 | M16 | 2 | 24 | 149 | 24 | 10 | 46 | 150 | 0.5 | 0.7 | ||||||
2.5 | M20 | 2.5 | 30 | 186 | 30 | 12 | 50 | 44 | 140 | 17 | 54 | 82 | 57 | 250 | 1.3 | 1.7 |
4 | M24 | 3 | 36 | 221 | 36 | 14 | 59 | 400 | 1.4 | 2.1 | ||||||
5 | M30 | 3.5 | 48 | 278 | 46 | 17 | 60 | 62 | 170 | 23 | 65 | 99 | 81 | 500 | 3.1 | 4.3 |
8 | M36-H | 4 | 62 | 222 | 55 | 22 | 77 | 78 | 225 | 27 | 85 | 124 | 101 | 800 | 5.8 | 7.3 |
■Ring load table |
Hanging icon | | | | | | | ||||
Count | 1 | 2 | 1 | 2 | 2 | 2 | 2 | 3~4 | 3~4 | 3~4 |
Load angle | 0° | 0° | 90° | 90° | 0°~45° | 45°~60° | Asymmetrical on both sides | 0°~45° | 45°~60° | Asymmetrical on both sides |
Thread | Load limit Tons | |||||||||
M8 | 0.3 | 0.6 | 0.3 | 0.6 | 0.42 | 0.3 | 0.3 | 0.63 | 0.45 | 0.3 |
M10 | 0.63 | 1.26 | 0.63 | 1.26 | 0.88 | 0.63 | 0.63 | 1.32 | 0.95 | 0.63 |
M12 | 1 | 2 | 1 | 2 | 1.4 | 1 | 1 | 2.1 | 1.5 | 1 |
M16 | 1.5 | 3 | 1.5 | 3 | 2.1 | 1.5 | 1.5 | 3.1 | 2.2 | 1.5 |
M20 | 2.5 | 5 | 2.5 | 5 | 3.5 | 2.5 | 2.5 | 5.2 | 3.7 | 2.5 |
M24 | 4 | 8 | 4 | 8 | 5.6 | 4 | 4 | 8.4 | 6 | 4 |
M30 | 5 | 10 | 5 | 10 | 7 | 5 | 5 | 10.5 | 7.5 | 5 |
M36 | 8 | 16 | 8 | 16 | 11.2 | 8 | 8 | 16.8 | 12 | 8 |
※Note:
·All side-turning rings meet or exceed ASME B30.26 (American Society of Mechanical Engineers) specifications.
·All rings are manufactured in accordance with the relevant European standard EN1677-1
·The wrought alloy steel used on the rotating sling is quenched and tempered.
·Batch numbers are printed on all forged parts and cap screws to facilitate inspection and verification on the quality certification instructions.
·The rotating slings can be rotated 360° all the way and have a 180° pivot pivoting function.
·The bolts are uniform metric threads (ASME/SNSI B18.3.1 M) and are grade 12.9 hexagonal alloy angle head bolts to DIN EN ISO 4762.
·The load is verified to be 2.5 times the load limit and has been certified.
·The force of 1.5 times the load limit was tested for 20,000 fatigue limits.
·The product is inspected by 100% magnetic particle inspection.
◎Remarks:
·When the design safety factor is 4:1, the verification load should be 2.5 times the load limit.
·Long bolts are designed for use with soft metal work pieces and through-hole workpiece designs.
·For metal, the thread depth should be at least 1 times the thread, the steel and cast iron workpieces should be at least 1.5 times the thread depth,
the aluminum alloy workpiece thread depth should be 2 times the thread, and the aluminum-magnesium alloy thread depth should be 2.5 times
the thread.